REQUEST A CREDIT ACCOUNT

Humidisorb Plus X-Corrode Moisture, Relative Humidity and Corrosion Control 2″ x 2″ Packets

£5.00
ex. VAT
£6.00
inc. VAT
Name(Required)
Preferred Communication Method
Hidden
This field is for validation purposes and should be left unchanged.

Description

Moisture, Relative Humidity and Corrosion Control Packets provide the best protection against damage from relative humidity and corrosion for any enclosure or piece of equipment that is operating, in transit, or in storage.

The contents of each packet will not affect or damage non-metal material and can withstand maximum temperatures of 176°F (80°C) and contact with bulk liquid water without impacting their effectiveness.

All packets come with self-adhesive mounting tape, which allows for easy installation into any enclosure, even if the enclosure is frequently opened.

Benefits

  • Economical
  • Easy installation
  • Helps improve the safety of personnel and equipment

Features

  • Self-regenerating
  • Five to ten times greater moisture absorbing capacity than ordinary desiccants such as silica gel
  • Effective when used in frequently opened enclosures
  • Backed with self-adhesive mounting tape
  • High dielectric strength
  • Non-toxic

Humidisorb Plus X-Corrode Packets are constructed of a heat-sealed, semi-permeable membrane material filled with Humidisorb, X-Corrode, or Humidisorb Plus X-Corrode, depending on your application needs.

They provide moisture and corrosion control in electrical and electronic enclosures.

Humidisorb is a self-regenerating desiccant that can absorb and release enormous quantities of moisture from surrounding air without becoming saturated. When first placed in service, a packet of granules will begin rapid absorption of moisture.

The packet will absorb at least five to ten times more moisture than the conventional desiccant before coming to equilibrium with the relative humidity (RH) of the surrounding air. This will usually take several weeks to occur, even in very humid environments.

During periods when the enclosure RH is lower than its long-term average the packet releases moisture in vapour form. The moisture desorption process cannot wet the air above its average RH level.

When enclosure RH tends to rise above its average level, the packet absorbs moisture. By absorbing moisture when the RH rises, and releasing some of the vapour phase moisture (regenerating) when the RH drops, the packet maintains a constant RH within the enclosure that is equal to the long-term average humidity.

X-Corrode

X-Corrode provides protection against airborne contaminants that cause corrosion, such as Hydrogen Sulphide (H2S), Chlorine (Cl2), and salts. The X-Corrode formula provides a durable passivation on the surface of circuit component metals; other metals, such as aluminium and steel that may be present in an enclosure, are also passivated, but to a smaller degree.

Tests have shown that once a metal surface was initially passivated by X-Corrode, the packet could be removed with corrosion protection remaining for weeks after. This means that frequently opened enclosures are also well protected by the X-Corrode packet.

Advantages

The mixture of the desiccant and corrosion inhibitor has three distinct advantages over the use of the individual Humidisorb and X-Corrode packets.

1) It is easier to stock and install a single packet instead of two

2) It costs less than the combined cost of a Humidisorb packet and X-Corrode packet.

3) Its life span is substantially longer than that of the X-Corrode packet alone. The Humidisorb granule portion of the mixture does not need to be replaced. The life span of the X-Corrode granules is greatly extended (from typically two years to approximately 10 years) due to its encapsulation by the Humidisorb granules after the packet has been exposed to moisture.

HXC 2″ x 2″ and HXC 4″ x 4″ packets are sold in multiples of 10 Humidisorbs. 

Additional Information

Weight 0.005 kg
Brand

Configuration

Talk with the Experts

Contact us - Our team of application specialists can assist you with system design, installation, maintenance, and repair. As a systems integrator, we provide end-to-end support to ensure your facility has a reliable and effective gas detection system in place.

Sign up for more information - For more information on protecting your staff from the dangers of gas leaks, sign up for our emails.