Specialist Gas Monitoring Equipment

Items 1 to 12 of 13 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • AIRQUAL-1 Breathing Air Quality Test Kit

    The AIRQUAL-1 Breathing air quality test kit tests that the quality of breathing air testing to meet the international standards set by BS EN12021:2014.

    The AIRQUAL-1 provides inline, on the spot indication of compressed air quality packaged in a rugged peli-case

    It measures for Oil Mist, Water Vapour, Carbon Dioxide, Carbon Monoxide and Oxygen contaminants. 

    Learn More
    Excl. VAT: £1,395.00 Incl. VAT: £1,674.00

  • Environics 2000 - Gas Mixer

    Environics 2000 is a computerised gas mixer that automatically mixes up to eight individual gases in a balance gas for precise calibration standards

    Learn More
  • Environics 2020 - Gas Dilution System

    The Environics 2020 is a multi-channel gas dilution system for multi-point and multi-scale calibrations

    Learn More
  • Environics 4000 - Gas mixer

    Environics 4000 is a low cost, multi-component gas mixing system

    Learn More
  • Environics 4040 - Gas Dilution System

    The Environics series 4040 is a computerised gas dilution system that automatically generates precise gas standards for multi-point calibration for gas analysers.

    Learn More
  • OdaLog Dry Dock

    The OdaLog Dry Dock reduces recovery time for the OdaLog L2 by half.

    OdaLog gas sensors absorb moisture at the same rate of recovery. The calculation for how long to ‘dry’ excess moisture from the sensor remains the same between both SL and LL model OdaLog Instruments. Use of the OdaLog Dry Dock, reduces the recovery time by half.

    This speeds up the downtime and allows odour control engineers to re-deploy the OdaLogs back into the sewer.

     

    Learn More
    Excl. VAT: £185.00 Incl. VAT: £222.00

  • OdaLog Logger L2

    The OdaLog Logger L2 is specifically designed for the wastewater industry, primarily for locating Hydrogen Sulphide (H2S) emissions in harsh, humid, and dirty wastewater environments. 

    The OdaLog is popular with the UK's large water companies for odour control management

    The OdaLog also detects H2S, CO, SO2, NO, NO2, NH3, HCN and Cl2 at various detection ranges. Please contact the sales office for these configurations

    Learn More
    Excl. VAT: £1,160.00 Incl. VAT: £1,392.00

  • OdaLog RTx Surface Mount Antenna

    The surface mount antenna is external to OdaLog RTx used to transmit data Learn More
    Excl. VAT: £325.00 Incl. VAT: £390.00

  • OdaStat-G Software Kit - For L2 and RTx OdaLog Versions

    For use with L2 and RTx OdaLog Dataloggers

    OdaStat-G can interfaces with a PC through an IrDA or internet. The software allows data to be presented in tabular or graphical form to highlight significant variations in H2S levels over time

    Learn More
    Excl. VAT: £215.00 Incl. VAT: £258.00

  • Photoacoustic Gas Monitor 1314i

    The Photoacoustic Multi-gas Monitor – INNOVA 1314 is a highly accurate, reliable and stable quantitative gas monitoring system which uses a measurement system based on the photoacoustic infra-red detection method, and is capable of measuring almost any gas that absorbs infrared light.

    Learn More
  • Photoacoustic Gas Monitor 1412i

    The Photoacoustic 1412 is a highly accurate, reliable and stable quantitative gas monitor that speciates between almost any field gas that absorbs infrared light at a very low detection limit (PPB range) enabling it to identify individual gases.

    • Multi-Gas Monitoring – up to 5 different gases (+ water vapour) can be measured with excellent sensitivity and accuracy
    • Highly versatile: selectively measures a wide range of gases/vapours, with more than 200 compounds already tested,
    • Highest stability (low drift) makes calibration only necessary 1-2 times a year
    • Accurate – compensates for temperature and pressure fluctuations, water-vapour interference and interference from other known gases
    Learn More
  • Ultrasonic Personal Air Sampler (UPAS)

    The Ultrasonic Personal Air Sampler (UPAS) is a self-contained personal sampler with no tubes that measures PM2.5 to PM10 particulate sizes.

    It benefits from ultrasonic pumping technology to provide substantial reductions in size, weight, noise, and cost along with increased durability over traditional sampling equipment. 

    • Ready to go out of the box
    • Quiet, operating at less than 40dB
    • Hassle-free tubeless & lightweight design
    • Wireless connectivity & UPAS App control
    • Built-in sensors:
    • – Automatic Flow Control
    • – Environmental Attributes
    • – GPS

    No calibration. No tubes. No tape. Simple.

    Learn More
    Excl. VAT: £1,010.00 Incl. VAT: £1,212.00

Items 1 to 12 of 13 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2