Call +44 (0) 151 321 0275 | Contact Us

LAS 300 XD In Situ Cross Duct Gas Monitor

SKU: LAS 300 XD

The Tunable Diode Laser Spectroscopy (TDLS) is the perfect technology to use when you are looking for a selective measurement and a fast response time on some gas components as NH3, HCL, HF or even O2 when conditions are too rough for standard O2 Zirconia In-Situ analysers.


Tunable Diode Laser Absorption Spectrometry is the future of raw gas measurement

Product Description

Details

The state-of-the-art laser based analysers to cover number of applications for CEMS regulatory as well as process control such as:

- Coal Fired Boiler HCl Measurement on Dry FGD Scrubber Stack

- Brick manufacturer HCL Stack Measurement

- Measurement in combustion applications (Utilities). HCl measurement in the Raw Gas Measurement applications as for the low HCl

- Aluminium Smelter HF Measurement

 - Cement plant HCl monitoring

- Ammonia Slip measurement in DeNOx units (SCR & SNCR applications) as for Ammonia measurement in Urea/fertilisers plants.

The Technology

TDLS method is a non-contact optical technology and therefore the emitter (laser source) as the sensor stays protected from any contamination or corrosion and so
the maintenance operation and the cost of operation are very low compared to other technologies.

Thanks to the improved and fast A/D converters, the use of Direct Absorption Spectroscopy (DAS) is now the “must” for the TDLS analysers, compared to WMS (Wavelength Modulation Spectroscopy).

By using DAS technology, LAS 300 analysers Series are able to:
- Measure very low gas concentrations (few ppb levels)
- Measure very high gas concentrations – Large dynamic range vs WMS
- Measure with a very high accuracy (the absorption is directly related to the gas molecule and allows extremely accurate measurement using fundamental and proven signal processing algorithms for single gas and multi-gas applications).
- Measure with a very high linearity (the absorption is measuring the area under the curve - thanks to Beer Lambert law) Improve laser scan frequencies that allow an accurate measure even with fast changing process conditions – High Response Time vs WMS.

4 different versions to meet your analytical requirements:

- LAS 300 XD HF for Hydrofluoric acid (HF) and water (H2O) monitoring
- LAS 300 XD HCl for hydrochloric acid (HCl) and water (H2O) monitoring
- LAS 300 XD NH3 for ammonia (NH3) and water (H2O) monitoring
- LAS 300 XD O2 for Oxygen monitoring

Benefits:

- High sensitivity (ppb, ppm concentrations)
- Interference free gas measurements
- Large dynamic range
- Absolute measurements: no drift, no calibration, inherently linear
- Real-time (1 s response)
- In-situ and non-invasive (optical technique)
- Suitable for harsh environment; sensor unaffected by contaminants (no corrosion)
- Absence of extractive conditioning: eliminates errors related to sample handling
- Very low maintenance, low cost of ownership

Main Applications:

Process analysis, Combustion control, Emission monitoring, Chemical industry, Fertiliser plants, Petrochemical industry, Power plants, Waste Incinerators, Cement industry, Glass industry, Pulp and paper, Scrubber technology, Biomass boilers

Product Downloads

View FileLAS300XD Cross Duct Sensor Datasheet
Enquire Now