Learn More About our Project Consultancy at AQE 2013

What: AQE Show 2013 (formerly MCERTS)
When: 13th & 14th March
Where: Telford International Centre
Stand: 37 & 46


Formerly known as MCERTS show, the 7th in the series titled Air Quality & Emissions Show 2013 (AQE) will look at both emissions to air monitoring and industrial emissions monitoring. Across the 2 days there are over 50 exhibitors as well as a series of free workshops and talks.

After the success of 2011 MCERTS event a1-cbiss are returning for the bi-annual event in 2013.

Teaming with Environnement SA we will be bringing you the latest MCERTS accredited CEM systems and ambient air quality testing equipment.

You can find a1-cbiss on stand 27&46 and also engage in one of our consultative workshops on day 1 (see below for details)
Heated Multi-Gas Infrared GFC Analyser
The MIR9000H from Environnement provides multi-gas analysis for DeNOx applications, offering simultaneous and continuous measurement. It is designed to measure wet and corrosive samples of CO, CO2, NO, NO2,SO2, HCl, O2 in addition of NH3 and H2O. The new stainless steel casing improves on an established design to provide analysis in even the harshest of industrial environments.

Compact, Short Extractive CEM System
The MIR-IS uses Infra-Red Gas Filter Correlation principle (a well-established method) to reduce cross interferences between compounds to ensure high accuracy. This technology provides high performance sensitivity and a multi-gas analysis solution (Up to 10 gases including). The MIR-IS uses advanced technology to integrate flue gas, temperature, flow and pressure to utilise a single sampling point.

BTEX Analyser suited for portable and fixed ambient air quality monitoring
Using both gas chromatography and a photo-ionisation detector the VOC72M provides benzene measurement in compliance with EN14662-3. The VOC72M performs sampling, analysis and data management, in a simple and completely autonomous mode.

Chemiluminescent Nitrogen Oxides Analyser
The model AC32M is a state-of-the-art single chamber that uses a single photomultiplier tube design to automatically cycle between both NO and NOx modes. Featuring a built-in serial interface, and an onboard web server the AC32M is capable of remote maintenance and diagnostics from any pc, tablet or iPhone.

All software is supported by our own MCERTS accredited data acquisition software – CDAS.

a1-cbiss consultative workshops
As industry influencers we have been asked to present a workshop discussion AQE 2013. The first workshop from a1-cbiss entitled “A Consultative Approach: Your Guide to CEMS Equipment” takes place on day 1. With extensive knowledge of UK and European standards, we discuss how we can offer guidance and ongoing support in understanding and complying with your site permit.

The second topic of discussion “Getting the Most from Your Data Acquisition Software” highlights the features and benefits of our own data acquisition software CDAS.

To find out more about any of the products displayed at AQE contact Sam Thorneycroft on 0151 666 8300 or email sales@a1-cbiss.com

To view the full workshop timetable visit the AQE site >

Leave a Reply

Sorry, you must be logged in to post a comment.