Gas Detection System Control Panels
The primary function of a fixed gas detection system control panel is to trigger an event within an area that could potentially encounter unsafe levels of gas. The control panel could activate extractor fans, turn off process supply lines or create an alarm to warn personnel of danger.
Our Products
ChemDAQ® Steri-Trac 2+ Peracetic Acid Monitoring System
Find Out More
Crowcon Gasmaster Gas Detection Control Panel
Find Out More
Oldham MX43 Fixed Gas Detection Control System
Find Out More
MX16 Toxic/Combustible Single Channel Controller
Find Out More
MX32 Analogue/Digital Gas Controller
Find Out More
Crowcon GM64 Addressable Gas Controller
Find Out More
Product Information
Gas Detection System Control Panels are normally located in a safe area but can be installed in hazardous zones. They communicate with gas detection sensor heads or transmitters and can be networked to a central point so that multiple control panels/systems can be monitored remotely.
Site Survey
We will profile your workplace, consider environmental conditions, check the zone classification, and understand your aims so you know exactly the type of gas detection system required
Leading Brands
Crowcon, Teledyne (Oldham), ChemDAQ and more!
What are Gas Detection System Control Panels?
Combined with a variety of detector types, our gas detection control panels offer a flexible range of solutions which are able to measure flammable, toxic and oxygen gases, report their presence and activate alarms or associated equipment.
Our Gas Detection System Control Panels provide all the information you need about your gas and fire detectors at a glance. The large multi-lingual display shows gas levels from all detectors simultaneously and enables system adjustment and testing using buttons on the front panel.
You can operate ‘stand-alone’ or interface with any alarm devices and control systems using a selection of outputs.
Key features:
All gas levels are displayed simultaneously – enables full systems status check at a glance
Alarm messages can be customised to indicate the name or location of any detector in alarm
The LCD can be set to display in many languages
Menu system is intuitive and easy to use – enables configuration changes to be made easily
Event log feature – enables system fault and alarm history to be viewed