Our dedicated Sales Advisors and Support Team are committed to finding you the right solutions to meet your specific requirements.
Our solutions satisfy applications from small facilities up to large multi-site facilities and everything in between.
We are a dedicated team of technical sales people, customer service advisors and engineers that recommend, supply and install a range of emissions monitoring, gas sampling and personal safety products.
The principle of a linearity test is to check that the gas analyser system is ‘linear’.
The linearity shall be calculated and tested using the procedure given in annex B of the standard EN14181. Linearity tests can be performed by Service Engineer, Site Engineer or Stack Testing House, although must be deemed competent to perform the checks.
The new workplace exposure limits (WELs) for Formaldehyde come into force on 11th July. Will you be ready?
There is no legal requirement for a Health and Safety Executive (HSE) inspector to visit unannounced and review your gas detection controls. If they visited out of the blue, would you be ready?
NHS England have issued an imminent alert for hospital estates and facilities teams to evaluate risks caused by oxygen enrichment. By 18th December 2020, hospitals need to have their action plan in place.
Sterilisation is vitally important in healthcare sectors. Chemical sterilants and especially gas sterilants are the most commonly recommended methods for sterilising medical devices. We expose the commonly perceived sterilisation myths that endoscopy units should be aware of...
At waste incineration plants, fuel derives from household waste, clinical waste, hazardous waste or biomass. Whilst these materials provide excellent sources of fuel, they emit dangerous gases which pose a threat to those working at the plant.
Gas detection equipment must be installed and used by personnel to adhere to health and safety regulations.
The FGM Series is a safe area gas detection solution for sites which require 1 to 16 channels of detection.
The FGM is a cost-effective high specification gas monitor that communicates with any combination of sensors from the FGS range. It can be connected by simply wiring in parallel, cutting down on installation costs.
When planning for the implementation of a new project, protect your investment with a complete site survey.
The FlexSonic gas leak detector adds a whole new layer of plant protection. It listens to gas leaks where others don't.
a1-cbiss are one of the few UK gas detection companies that can supply the whole package from specification right through to system installation and ongoing service support.
a1-cbiss have a nationwide team of service engineers who serve the whole of the UK servicing existing installations, carrying out onsite calibration and repairing gas detection systems.
Ethylene oxide is most widely used as a sterilant. Because of the potential number of health risks associated with ethylene oxide, monitoring the breathing environment near sterilisation equipment is essential.
