Projects
Our solutions satisfy applications from small facilities up to large multi-site facilities and everything in between.
Projects
Our solutions satisfy applications from small facilities up to large multi-site facilities and everything in between.
a1-cbiss Acquired by ENVEA and Have Merged with ENVEA UK
On the 1st of July 2023, A1-CBISS Limited merged with ENVEA UK Limited. This takes place after the acquisition of A1-CBISS Limited in September 2021 by the ENVEA Group.It will significantly strengthen our design, manufacturing, integration and service provision for...
Introducing Our First Ireland-Based Engineer
Introduction As the first and only Irish engineer on our a1-cbiss service team, Tom Kennedy has made a significant impact on our customer experience. With Tom as a permanent engineer in Ireland, we have seen considerable improvements in our response times. The eight...
Are You BREF Compliant?
Waste incineration plant operators only have until 3rd December to be compliant with the new Emission Limit Values (ELVs) as specified in the BAT conclusions. Waste Incineration The monitoring of emissions to air represents an important element in preventing and...
Air Quality Monitoring Stations
Reducing air pollution is a major challenge for private, public and local authorities in the UK. The Local Air Quality Management (LAQM) regime requires every local council to regularly review and assess air quality in their area. Our Air Quality Monitoring Stations...
Prove Your Biogenic CO2 Emissions
Incinerator operators are heavily incentivised to prove the calculation of the fraction of biogenic CO2 emissions. There is currently a transition from fossil-based materials to products based on renewable materials. This transition has led to a need to control the...
New ambient air monitor for dust concentrations in indoor workspaces
a1-cbiss are excited to announce that ENVEA have launched their new indoor ambient air monitor. ENVEA presents the AirSafe PM, the new indoor ambient air monitor of microparticle dust concentrations in workspaces. The AirSafe PM is used as a tool to help ensure safe...
Launch of New Mercury SM-5 CEMS Analyser
The new SM-5 is the next generation of mercury CEMS analysers. The SM-5 mercury CEMS analyser meets the Waste Incineration BREF requirements, making it ideal for plants that must have a mercury CEMS analyser installed. The SM-5 was designed for hazardous waste...
The Impact of BREF and BAT on Emissions to Air Solutions
Environmental regulations and standards are regularly updated to meet new climate change targets. Waste Incineration (WI) and Large Combustion Plant (LCP) daily Emission Limit Values (ELVs) are reducing under BREF. The Large Combustion Plant BAT Conclusions were...
AMESA-B Records Accurate Biogenic CO2 Emissions
The Environment Agency (EA) requests EfW plant operators to report Pollution Inventory (PI) emissions which now includes biogenic CO2 sources. The EA is keen to improve the quality of data on greenhouse gas emissions within the EfW sector. Environment Agency’s...
New Hydrogen & Ammonia Sensors for the Gas-Pro Detector
Crowcon has launched new hydrogen (H2) and Ammonia (NH3) sensors for its portable Gas-Pro gas detector. Hydrogen Sensor The new sensor detects hydrogen at between zero and 1000 parts per million (ppm) and has an over-range of 2000 ppm. Since the Gas-Pro can be used...
Continuous Emissions Monitoring Systems
Continuous Emissions Monitoring Systems (CEMS) are installed at industrial process plants to continuously collect, record and report emissions data. Achieve Emissions Compliance Requirements for monitoring emissions to air are stipulated in the Industrial Emissions...
Make Linearity Testing Easier with a Gas Divider
The principle of a linearity test is to check that the gas analyser system is ‘linear’. The linearity shall be calculated and tested using the procedure given in annex B of the standard EN14181. Linearity tests can be performed by Service Engineer, Site Engineer or...
Do You Know the Dangers of Isocyanates?
Isocyanates are a class of highly reactive and powerful compounds that produce superior-quality products. Used across the manufacturing industry, isocyanates a regarded as a benchmark for high performance. But isocyanates have a dark side too which can lead to poor...
How EfW Sites Control Cost of Gas Abatement
By monitoring and optimising the gas abatement process in Energy from Waste plants, operators can achieve two things. Firstly, compliance with the new Emission Limit Values (ELVs) in the revised site permits, derived from the Industrial Emissions Directive 2010/75/....
a1-cbiss to Exhibit at RWM Event
We're back exhibiting after a 2 year absence! Following the repeated postponements, it's great to be going full steam ahead and planning for the RWM show at the end of September. Over the past 18-24 months, there have been a lot of changes to emissions monitoring in...